• XCMG Brand Hydraulic Mobile Crane 25 Ton Truck Crane Qy25K-II

    Product Details: 

    • Product Type: Truck Crane 
    • Brand: XCMG 
    • Model: Qy25K-II 
    • Max. total rated lifting capacity: 25 ton 
    • Min. rated working radius: 3 m
    • Turning radius at turntable tail: 3065 mm
    • Max. load moment
      Base boom: 1000 KN.m
      Fully-extended boom: 600 KN.m
      Fully-extended boom + Jib: 376 KN.m
    • Outrigger span
      Longitudinal: 5.14m
      Lateral: 6 m
    • Hoist height
      Base boom: 10.8 m
      Fully-extended boom: 34.19m
      Fully-extended boom + Jib: 42.3 m
    • Boom length
      Base boom: 10.7 m
      Fully-extended boom: 34 m
      Fully-extended boom + Jib: 34+8.15 m
    • Jib offset angle: 0, 15, 30°
    • Time for boom raising: 75 s
    • Time for boom lowering: 45 s
    • Time for boom extending fully: 100 s
    • Time for boom retracting fully: 60 s
    • Exterior noise level: ≤118 dB (A)
    • Noise level at seated position: ≤90 dB (A)
    ৳ 1.00 Per Unit
  • XCMG 55 Ton Crane Truck Hydraulic Truck Crane QY55KA_Y

    Product Details: 

    • Product Type: Truck Crane 
    • Brand: XCMG 
    • Model: QY55KA_Y
    • Total length: 13100 mm
    • Total width: 2750 mm
    • Total height: 3350 mm
    • Total weight in a traveling state: 38580 kg
    • Front axle load: 12950 kg
    • Rear-axle load: 25630 kg
    • Max. travel speed: 66 75 Km/h
    • Min.turning diameter: 24 24 mm
    • Min. ground clearance: 285 285 mm
    • Approach angle: 16 16°
    • Departure angle: 11 11°
    • Max. gradeability: 27 46%
    • Fuel consumption of 100km: 42 42 L 
    • Max. lifting capacity: 50 ton
    • Min. rated working radius: 3 m
    • Turning radius at swing table tail: 3482 m
    ৳ 1.00 Per Unit
  • XCMG Hydraulic 85ton Crane Truck Mounted Crane QY85KA-Y

    Product Details: 

    • Product Type: Truck Crane 
    • Brand: XCMG 
    • Model: QY85KA-Y
    • Max Lifting Capacity: 85 Ton
    • Axle Distance First or Second: 1500 mm
    • Axle Distance Second or Third: 4665 mm
    • Axle Distance Third or Fourth: 1500 mm
    • Axle Load First or Second: 12000+12000 kg
    • Axle Load Third or Fourth: 12000+12000 kg
    • Base Boom Length: 12.2 m
    • Base Boom Lifting Moment: 2969 kN-m
    • Boom Section: 5
    • Boom Shape: “U” Shaped
    • Departure Angle: 15 Deg
    • Drive Steer: 8x4x8
    • Engine Rated Power Speed: 276 kW / 2200 rpm
    • Engine Rated torque: 1480 / 1200 – 1600 Nm
    • Fuel Consumption: 48 L (per 100km)
    • Fuel Tank Capacity: 350 L
    • Full Extend Boom Jib Length: 64.5 m
    • Full Extend Boom Jib Lifting Moment: 481 kN-m
    • Full Extend Boom Length 47 m
    • Full Extend Boom Lifting Moment: 1428 kN-m
    • Hydraulic Oil Tank Capacity: 900 L
    • Jib Offset: 0,15,30 Deg
    • Max Gradeability: 37%
    • Max Traveling Speed: 80 km/hr
    • Min Ground Clearance: 427 mm
    • Min Rated Working Radius: 3 m
    • Min Turning Radius: 10 m
    • Min Turning Radius of Boom Head: 12.97 m
    • Outrigger Span LongitudinalxTransversal: 6.4×7.6 m
    • Overall Height: 3880 mm
    • Overall Length: 14650 mm
    • Overall Weight: 48000 kg
    • Overall Width: 2800 mm
    ৳ 1.00 Per Unit
  • XCMG Official 50 Ton Construction Truck Crane Xct50_Y

    Product Details: 

    • Product Type: Truck Crane 
    • Brand: XCMG 
    • Model: XCT50_Y 
    • Max. Output Torque/Rpm: 1350/1100-1600n.M/(R/Min)
    • Max. Travel Speed: 90km/H
    • Min. Ground Clearance: 260mm
    • Specification: 14045*2790*3615mm
    • Approach angle: 19°
    • Departure angle: 13°
    • Max. grade ability: 40%
    • Fuel consumption per 100 km: 38L
    • Max. total rated lifting capacity: 50ton 
    • Min rated working radius: 3m
    • Base boom: 11.2m
    • Fully-extended boom: 43.3m
    ৳ 1.00 Per Unit
  • XCMG factory QY25K5A_Y Truck Crane

    Product Details: 

    • Product Type: Truck Crane 
    • Brand: XCMG 
    • Model: QY25K5A_Y 
    • Overall length: 12680mm
    • Overall width: 2500mm
    • Overall height: 3400mm
    • Axle base: 4425+1350mm
    • Wheelbase: 2074/1834/1834mm
    • Weight: 32800kg
    • Max. travel speed: 90km/h
    • Min. turning diameter: 22m
    • Min. ground clearance: 275mm
    • Approach angle: 11°
    • Departure angle: 12°
    • Braking distance(at 30 km/h): ≤10m
    • Max. grade ability: 41%
    • Oil consumption per 100km: ≤32 L
    • Exterior noise level in accelerating: 88 dB(A)
    • Noise Level at seated position: 90 dB(A)
    ৳ 1.00 Per Unit
  • XP103 Small 10 Ton Pneumatic Tire Compactor Roller

    Product Details: 

    • Product Type: TYRE ROLLER
    • Brand: XCMG 
    • Model: XP103 
    • Operating Weight: 9350-10000kg
    • Theoretical Gradeability: 20%
    • Min. External Turning Radius: 7253mm
    • Compacting Width: 2055mm
    • Ground Pressure: 150-300kpa
    • Rated Power: 92kw
    • Specification: 4780*2232*3340mm
    • Max.working mass: 10000kg
    • Water tank capacity: 650kg
    • Drum width: 2055mm
    • Shangchai engine SC4H125.2G3,92kw
    • Cabin with A/C,
    • Gearbox,axles,Tires: Front 4 Rear 5
    ৳ 1.00 Per Unit
  • XCMG 6 ton Construction Loader Front Loader LW600KN

    Product Details: 

    • Product Type: Wheel Loader
    • Brand: XCMG 
    • Model: LW600KN
    • Rated Power: 175kW 235HP @2,200rpm
    • Operating Weight: 20,000kg 44,092lb
    • Bucket capacity: 3.5m3 4.6yd3
    • Dimensions(L×W×H): 8,740mmX3,020mmX3,550mm
    • 28’8”X9’11”’X11’8”
    • Dump clearance at maximum lift: 3170~3750mm
    • Reach maximum lift: 1200~1360mm
    • Wheelbase: 3350mm
    • Tread: 2265mm
    • Max.breakout force: 205kN
    • Max.horse power: 174kN
    • Hydraulic cycle time-raise: ≤5.9s
    • Total hydraulic cycle time: ≤10.9s
    • Min. turning radius over tyres: 6005mm
    • Articulation angle: 38°
    • Gradeability: 28°
    • Tyre size: 23.5-25
    ৳ 1.00 Per Unit
  • XCMG 5ton Wheel Loader LW500KN

    Product Details: 

    • Product Type: Wheel Loader
    • Brand: XCMG 
    • Model: LW500KN
    • Rated operating load: 5000kg
    • Bucket capacity: 2~4.5m³   
    • Machine weight: 16900kg
    • Dump clearance at maximum lift: 3150~3560mm  
    • Wheelbase: 2960mm
    • Tread: 2250mm
    • Height of hinge at maximum lift height: 4112mm
    • Working height(fully lifted): 5510mm
    • Max.breakout force: 170kN
    • Hydraulic cycle time-raise: ≤6s
    • Total hydraulic cycle time: ≤10.5s  
    • Min. turning radius over tyres: 5950mm
    • Articulation angle: 35°
    • Gradeability: 28°
    • Tyre size: 23.5-25-16PR 
    • Overall machine dimension L×W×H: 7910×3016×3515mm 
    ৳ 1.00 Per Unit
  • XCMG official 4-ton construction wheel loader LW400KN

    Product Details: 

    • Product Type: Wheel Loader
    • Brand: XCMG 
    • Model: LW400KN 
    • Rated Load: 4t
    • Bucket Capacity: 2.4m3
    • Breakout force: ≥130kN
    • Drawing force: ≥123kN
    • Min. turning radius: 5946mm
    • Raising Time: 5.5s
    • Total cycling time: 10.5s
    • Tipping load: 8300kg
    • Traveling speed  
      1st Gear (F): 0-11 km/h
      2nd Gear (F): 0-35 km/h
      3rd Gear (R): 0-15
    • Overall dimensions (L*W*H): 7978*2786*3495mm
    • Operating weight: 14.2t
    ৳ 1.00 Per Unit
  • XCMG 3ton Front End Wheel Loader LW300KN

    Product Details: 

    • Product Type: Wheel Loader
    • Brand: XCMG 
    • Model: LW300KN
    • Rated operating load: 3000kg
    • Bucket capacity: 1.5~2.5m³
    • Machine weight: 10900±200kg
    • Dump clearance at maximum lift: 2770~3260mm
    • Reach maximum lift: 1010~1210mm
    • Wheelbase: 2900mm
    • Tread: 1850mm
    • Height of hinge at maximum lift height: 3830mm
    • Working height(fully lifted): 4870mm
    • Max.breakout force: 130kN
    • Max.horse power: 95kN
    • Hydraulic cycle time-raise: 5.4s
    • Total hydraulic cycle time: 9.3s
    • Min. turning radius over tyres: 5170mm
    • Articulation angle: 38±1°
    • Gradeability: 28°
    • Tyre size: 17.5-25-12PR
    • Overall machine dimension L×W×H: 7245×2482×3320mm
    ৳ 1.00 Per Unit
  • XCMG 1.8ton Wheel Loader Mini Payloader Lw180K

    Product Details: 

    • Product Type: Wheel Loader
    • Brand: XCMG 
    • Model: Lw180K
    • Rated operating load: 1800kg
    • Bucket capacity: 0.9~1.1m³
    • Machine weight: 6200kg
    • Dump clearance at maximum lift: 2650~2970mm
    • Reach maximum lift: 900~1000mm
    • Wheelbase: 2300mm
    • Tread: 1550mm
    • Max.breakout force: ≥58kN
    • Hydraulic cycle time-raise: 5s
    • Total hydraulic cycle time: ≤8.5s
    • Min. turning radius over tyres: 4470mm
    • Articulation angle: 35°
    • Gradeability: 28°
    • Tyre size: 16/70-20
    • Overall machine dimension L×W×H: 5980×2060×2950
    ৳ 1.00 Per Unit
  • XCMG Official 15 TON Semi-Autonomous Wheeled Excavator XE150W

    Product Details: 

    • Product Type: TIRE EXCAVATOR
    • Brand: XCMG
    • Model: Xe150W
    • Machine Weight: 15318.000kg
    • Outline size: 6428×2552×3158 mm
    • Operating weight: 15318 kg
    • Bucket capacity: 0.58 m³
    • Engine model: QSB4.5 /
    • Output power of engine: 104/2000 Kw/r/min
    • Max.torque/engine: 586 N.m
    • Displacement: 4.5 L
    • Fuel tank capacity: 250 L
    • Rated flow of main pump: 2×160 L/min
    • Pressure of main safety valve: 31.4/34.3 L
    • Hydraulic tank capacity: 135 L
    • Slewing speed: 13.7 r/min
    • Digging capacity of tcuket: 60 KN
    • Digging capacity of tcuket rod: 65 KN
    • Min.turning radius: 6500 mm
    • USA Cummins Engine
    • With Original Kawasaki main pump
    • With Parker’s main valve.
    • Bucket size 0.58 cubic meter
    • Pilot Control
    • With A/C Cabin
    ৳ 1.00 Per Unit
  • XCMG Xmr083 Light Vibratory Double Road Rollers

    Product Details: 

    • Product Type: TANDEM ROLLER
    • Brand: XCMG 
    • Model: Xmr083
    • Rated Power:
    • 10.5kW 14HP @3,600rpm
    • Operating Weight:
    • 500kg 1,102lb
    • Drum Width: 720mm 2’4”
    • Drum Diameter: 552mm 1’10”
    • Dimensions(LXWXH):
    • 2,118mmX831mmX1,291mm
    • 6’11”X2’9”X4’3”
    • With Changchai Engine 5kw
    • gasoline engine
    • Operation weight of 0.8 ton
    • Tandem roller
    • Double hydraulic drive
    ৳ 1.00 Per Unit
  • XCMG Brand New Slurry Dry Cleaning Machine HDD Xz200

    Product Details: 

    • Product Type: Slurry Dry Cleaning Machine
    • Brand: XCMG 
    • Model: XZ200
    • Max.spindle torque: 6350 N.m
    • Spindle speed: 0-155 r/min
    • Spindle traveling speed: 0-26 m/min
    • Max.backreaming diameter: 600 mm
    • Pipe length(single: 3 m
    • Pipe diameter: 60 mm
    • Entry angle: 10-22
    • Max.mud flow rate: 200/250L/min
    • Max.mud pressure: 80 bar
    • Dimension LxWxH: 6200x2250x2400 mm
    • Overall weight: 8.5 ton
    • Engine model: 6BTAA5.9-C150
    • Engine power: 112KW
    • Thrust-pull mode: Rack and pinion
    • Max.pullback/thrusting: 200/200 KN
    ৳ 1.00 Per Unit
  • XCMG Official Xt740 Skid Steer Loader

    Product Details: 

    • Product Type: Skid Steer Loader
    • Brand: XCMG 
    • Model: XT740
    • Rated Load: 750 KG
    • Rated Power: 40 kW @ 2650 RPM
    • Operating Weight: 3130 KG
    • Bucket Capacity: 0.45 m3
    • WeiChai Engine
    • Dumping height 2375
    • Bucket Capacity 0.45 CMB
    ৳ 1.00 Per Unit
  • XCMG Skid Steer Loader Xc760K Multifunction Small Loader Machine

    Product Details

    • Product Type: Skid Steer Loader
    • Brand: XCMG 
    • Model: Xc760k
    • Rated Load: 1100 KG
    • Rated Power: 60 kW @ 2300 RPM
    • Operating Weight: 3670 KG
    • Bucket Capacity: 0.6 m3
    • Deutz Weifan Engine
    • Dumping height of 2405
    • Bucket Capacity 0.6CMB
    • Pilot Control
    • Bucket Load: 0.6 m³
    • Rated Load: 1080 kg
    • Rated Power: 61.3 kW
    • Overall dimension(LxWxH: 3610*2000*1960 mm
    ৳ 1.00 Per Unit
  • XCMG Official Manufacturer Xr280d Rotary Drilling Rig

    Product Details: 

    • Product Type: Drilling Rig
    • Brand: XCMG 
    • Model: XR280D
    • Rated Power: 298kW
    • Max. Drilling Diameter: Φ2500 mm
    • Max. Drilling depth: 88 m
    • Operating Weight: 88000 KG
    • Host machine: Max.2500mm of drilling diameter, 88m of drilling depth, 280kN.m of Max. torque. Imported Cummins (298kW) turbocharging engine, imported hydraulic and electrical components, telescopic tracks chassis, and single layer main winch. Meet the European CE directive requirements.
    • Drill rod: choose one drill rod from standard configuration (φ508) 5-section frictional drill rod (73m) or 4-section mechanical interlock drilling rod (58m). Special designed 6-section frictional drill (88m) rod is accepted.
    • Bit: one standard configuration bucket teeth sand drill rigs (choose one from diameter φ800mm~φ2500mm).
    ৳ 1.00 Per Unit
  • XCMG Official Xr220dii Piling Machine Crawler Rotary Drilling Rig

    Product Details: 

    • Product Type: Drilling Rig
    • Brand: XCMG 
    • Model: XR220DII
    • Rated Power: 242kW
    • Max. Drilling Diameter: Φ2000 mm
    • Max. Drilling depth: 80 m
    • Operating Weight: 72000 KG
    • Certification: CE, RoHS, ISO 9001:2008
    • Drill Hole Diameter: 2000mm
    • Drill Hole Depth: 67/80m
    • Bit Type: Multi-Function
    • Host machine: 2000mm of drilling diameter, 67m of drilling depth, 220kN.m of Max. torque. Imported Cummins (242kW) turbo charging engine, imported hydraulic and electrical components, telescopic tracks chassis, and single layer main winch. Meet the European CE directive requirements.
    • Drill rod: choose one drill rod from standard configuration (φ406) 5-section frictional drill rod (67m) or 4-section mechanical interlock drilling rod (52m).
    • Bit: one standard configuration bucket teeth sand drill rigs (φ1200mm).
    ৳ 1.00 Per Unit
  • XCMG Official Manufacturer Xr180dII Rotary Drilling Rig

    Product Details: 

    • Product Type: Drilling Rig
    • Brand: XCMG 
    • Model: XR180DII
    • Certification: Ce/ISO9001
    • Applicable Industries: Construction Works
    • Weight: 49000kg
    • Dimension(L*W*H): 7550X4200X19040mm
    • Host machine: 1800mm of drilling diameter, 60m of drilling depth, 180kN.m of Max. torque. Imported Cummins (194kW) turbocharging engine, imported hydraulic and electrical components, telescopic tracks chassis, and single layer main winch. Meet the requirements of the European Union CE directive.
    • Drill rod: choose one drill rod from standard configuration (φ406) 5-section frictional drill rod (60m) or 4-section mechanical interlock drilling rod (46m).
    • Bit: one standard configuration bucket teeth sand drill rigs (φ1200mm).
    ৳ 1.00 Per Unit
  • XCMG Official RP603L Asphalt Concrete Paver with Ce

    Product Details: 

    • Product Type: PAVER
    • Brand: XCMG 
    • Model: RP603L
    • Certification: ISO9001: 2000, CE
    • With Shangchai engine 103Kw
    • Tyre system
    • Base paving width 2.5M
    • Max paving width 6m
    • Max paving depth 260mm
    • Specification: 6590*2600*3942mm
    • Weight: 19ton
    • Driving speed: 15m/min
    • Maximum layer thickness: 260mm
    • Maximum paving speed: 15m/min
    • Hopper capacity: 13t
    • Maximum laydown rate: 400t/h
    • Rated power: 103/2200 kW/rpm
    ৳ 1.00 Per Unit

Shop By Department

Shodagor app logo

Download mobile app